Monday, May 12, 2008

Installation Of Oracle Application Server 11.5.10.2(Multi Node )

Installation Instructions for Oracle Application Server 11.5.10.2 on Redhat Linux AS 4.0 (Multi Node )

Environment Name: REDHAT AS4 Machine:

Configuration of machines and OS
Configuration of Machines :-

2 GB RAM
150 GB HDD
Pantium IV 3 GHZ
DVD Rom

Operation Systems :-

Machine 1 :- apps01
Windows 2000 professional (50 GB, Primary Partition FAT32 *)
REDHAT Linx AS 4 (100 GB)

Machine 2 :- apps02
REDHAT Linx AS 4 (150 GB)



Installation of OS

Machine 1 :- apps01

Windows 2000 professional

- Install windows 2000 professional and create primary partition FAT32 so that you can mount on linux.
- Apply service pack 4.0


Redhat Linux AS 4.0

- Create Mount points as follows

Mount File system Size
/ Ext3 1GB
/boot Ext3 122MB
/ebis Ext3 79GB
/home Ext3 1GB
/opt Ext3 1GB
/var Ext3 1GB
/tmp Ext3 2G
/swap Ext3 4GB
/usr Ext3 10GB

- Select everything in custom selection of packages.

Machine 2 :- apps02


- Create Mount points as follows

Mount File system Size
/ Ext3 5GB
/boot Ext3 122MB
/ebis Ext3 114GB
/home Ext3 6GB
/opt Ext3 1GB
/var Ext3 2GB
/tmp Ext3 4G
/swap Ext3 4GB
/usr Ext3 10GB


- Select everything in custom selection of packages during linux installations



Prerequisite
Staging on Windows 2000 professional – Machine 01

1. Prerequisite

- Install and configure IIS 5.0 or above. It is prerequisite to run perl
- Download perl 5.8.8.8.7 from www.perl.com and install it. This is prerequisite for staging.
- Check the following DVD’s
 Oracle Application 11i Start Here Disk 1
 Oracle Application Rapid Install RDBMS Disk1
 Oracle Application Rapid Install Database Disk1 to Disk4
 Oracle Application Rapid Install Tools Disk1
 Oracle Application Rapid Install Appl_Top Disk 1 & Disk2

2. Insert Oracle Application 11i Start Here Disk 1 in DVD ROM drive

3. execute perl < DVDdrive>\mnt\cdrom\disk1\rapidwiz\adautostg.pl

4. Setup the stage Area Direcoty

At the prompt for the stage directory, enter the name of the system top-level
directory. The Rapid wizard stage11i directory will be created in this path.
5. When the script prompts select 1 (Oracle Applications) .
6. Insert the correct DVD’s as prompted by script
7. Staging will take approximately 25GB



Staging on Redhat Linux 4.0 AS– Machine 02

1. Check the following DVD’s
• Oracle Application 11i Start Here Disk 1
• Oracle Application Rapid Install RDBMS Disk1
• Oracle Application Rapid Install Database Disk1 to Disk4
• Oracle Application Rapid Install Tools Disk1
• Oracle Application Rapid Install Appl_Top Disk 1 & Disk2

2. Log in as Root and Check the current version of the perl installed

perl –v

it should be 5.8.5 or later
3. Mount the dvd rom

mount /dev/dvd /mnt/dvdrom

4. execute perl < DVDdrive>/dev/dvd/mnt/cdrom/disk1/rapidwiz/adautostg.pl
Setup the stage area At the prompt for the stage directory, enter the name of the system top-level directory. The Rapid wizard stage11i directory will be created in this path.
5. When the scripts prompts select 1 (Oracle Applications)
6. Insert the CD’s as prompted by the script
(Note : even Automount enabled DVD has to be unmounted from and remounted

umount /mnt/dvdrom
umount /dev/dvd

mount /dev/dvd /mnt/dvdrom and press enter


Pre-Installation Steps
Preparing the Operating systems for Oracle 11.5.10.2

Check the following packages

Required RPMS Installed RPMS
• compat-db-4.1.25-9
• compat-gcc-32-3.2.3-47.3
• compat-gcc-32-c++-3.2.3-47.3
• compat-oracle-rhel4-1.0-5
• compat-libcwait-2.0-2
• compat-libgcc-296-2.96-132.7.2
• compat-libstdc++-296-2.96-132.7.2
• compat-libstdc++-33-3.2.3-47.3
• xorg-x11-deprecated-libs-devel-6.8.1-23.EL
• xorg-x11-deprecated-libs-6.8.1-23.EL
• openmotif21-2.1.30-11.RHEL4.4
• libaio-0.3.102-1
• libaio-devel-0.3.102-1 • compat-db-4.1.25-9
• compat-gcc-32-3.2.3-47.3
• compat-gcc-32-c++-3.2.3-47.3
• compat-oracle-rhel4-1.0-5
• compat-libcwait-2.0-2
• compat-libgcc-296-2.96-132.7.2
• compat-libstdc++-296-2.96-132.7.2
• compat-libstdc++-33-3.2.3-47.3
• xorg-x11-deprecated-libs-devel-6.8.1-23.EL
• xorg-x11-deprecated-libs-6.8.1-23.EL
• openmotif-2.2.3-6.RHEL4.2
• libaio-0.3.102-1
• libaio-devel-0.3.102-1


The libaio components are available on Disk 3 of the RHEL4.0 media. For information on downloading the openmotif component, see the instructions at the following URL:
https://rhn.redhat.com/errata/RHSA-2005-412.html

1.1. After installing these patches, run ldconfig -v.
(Note : ldconfig creates the necessary links and cache to the most recent shared libraries found in the directories specified on the command line, in the file /etc/ld.so.conf, and in the trusted directories (/lib and /usr/lib). The cache is used by the run-time linker, ld.so or ld-linux.so. ldconfig checks the header and file names of the libraries it encounters when determining which versions should have their links updated )

1.2. Verify minimum Kernel Requirements with uname and rpm command,




[root@vision ~]# uname -r
2.6.9-5.ELsmp
[root@vision ~]# rpm -q glibc
glibc-2.3.4-2

1.3. Domain Name System (DNS) Resolver Parameters
Edit the following file /etc/resolv.conf and set the following parameters as below,
options attempts:5
options timeout:15

(Note : The resolv.conf file resides in the /etc directory and contains the IPs of domain name servers that you will probably need if you are going to do anything on the internet.
options :Allows certain internal resolver variables to be modified. The syntax is where option is one of the following
timeout: n (IN SECONDS)
sets the amount of time the resolver will wait for a response from a remote name server before retrying the query via a different name server.
attempts: n
sets the number of times the resolver will send a query to its name servers before giving up and returning an error to the calling application).


1.4. Host names

1.4.1. The format of hosts /etc/hosts file must be formatted as follows :

127.0.0.1 localhost.localdomain
.
(In apps01 hosts file make this entry and there should be entry for the other nodes which hosts the servers)

192.9.200.149 apps01.oneapps.com local_host
192.9.200.146 apps02.oneapps.com

(In apps02 the following entries to the /etc/hosts file has to be added )

192.9.200.146 apps02.oneapps.com local_host
192.9.200.149 apps01.oneapps.com

Ping the remote machine with and hostname and check
Comment the first line in the /etc/hosts file

1.4.2. Verify that the /etc/sysconfig/network file is formatted as follows :
HOSTNAME=.

Exi : HOSTNAME=apps01.oneapps.com

( Note : Make sure that your machines has static ip address)



1.5. If the /etc/sysconfig/networking/profiles/default/network file exists, remove it.

Note: If you changed any files in the previous steps, reboot the system.

1.6. Modify number of open descriptors: in file /etc/security/limits.conf add the following lines:
hard nofile 65535
soft nofile 4096

(.You can protect against certain types of denial of service attacks by modifying /etc/security/limits.conf. This file sets limits on system resources for each user.. The above setting limits the maximum number of files open)

1.7. Change port range value : /etc/sysctl.config add the following line,

net.ipv4.ip_local_port_range = 1024 65000

1.8. Set LD_ASSUME_KERNEL in file /etc/profile

LD_ASSUME_KERNEL=2.4.19
export LD_ASSUME_KERNEL

1.9. Apply one of these OS library patches: 4198954 (for Red Hat 4.0), you can download it from metalink.

 The above patch contains compat_libcwait-2.0-2.i386.rpm, compat-oracle-rhel4-1.0.-5.i386.rpm
 After applying the compat-libcwait-2.0-2.i386.rpm move the libcwait.so - library from /usr/lib to /lib and modify the path in /etc/ld.so.preload

2.0 Create a goup and two users one owner of database and other owner of oracle application

groupadd dba
useradd –g dba –G dba oracle
useradd –g dba –G dba applmgr
passwd oracle
passwd applmgr


Installation Steps
Installation of database server
Machine :- apps01

 Go to the following directory in your staging
/ebis/Stage11i/startCD/Disk1/rapidwiz

./rapidwiz

Press next for welcome screen

Select Installation option

Install Oracle Applications E-Business 11i

Load Configuration

No

Install Type

Multinode

Node Information

Database :- apps01
Administration :- apps01
Concurrent Manager :- apps01
Application :- apps02
Web:- apps02

Define Database type

Fresh Database ( PROD)

Database install information( Folder or Mount point)
/ebis
Database install information
Oracle OS User :- oracle
Oracle OS Group :- dba
Base Install Directory :- /ebis
Select Licensing Type
E-business Suite Licensing
Select Language
American English
Character Set
Default
Port Pool
Default
Configuration File path.
/tmp/config.txt

Follow the installation step upto completion of installation.

Application Server Installation.
Machine :- apps02
 Copy the configuration file from apps01.

ssh apps01.oneapps.com cat /tmp/config.txt > /tmp /config.txt

 Go to the following directory in your staging
/ebis/Stage11i/startCD/Disk1/rapidwiz

./rapidwiz

Press next for welcome screen

Select Installation option

Install Oracle Applications E-Business 11i

Load Configuration

Yes

Install Type

Multinode

Node Information

Database :- apps01
Administration :- apps01
Concurrent Manager :- apps01
Application :- apps02
Web:- apps02

Define Database type

Fresh Database ( PROD)

Database install information( Folder or Mount point)
/ebis
Database install information
Oracle OS User :- oracle
Oracle OS Group :- dba
Base Install Directory :- /ebis
Select Licensing Type
E-business Suite Licensing
Select Language
American English
Character Set
Default
Port Pool
Default
Configuration File path.
/tmp/config.txt

Follow the installation step upto completion of installation.

Include a subset of test steps that will confirm that the customization has been installed properly.


Post- Installation Steps

Apply patch 4632932 to all the application tiers, then re-source the applications environment file to refresh the environment variables. This patch is required for setting the values for LD_ASSUME_KERNEL and LD_PRELOAD.
Steps to Apply this patch

1. Connect as user applmgr on Application server
2. download patch 4632932 from metalink
3. Create a directory called patch in /ebis and unzip downloaded patch in this directory
4. Run adadmin utility and put the database into maintenance mode (type adadmin at shell prompt and it will guide you to put the application in maintenance mode .
5. Apply the patch using adpatch utility
6. After applying the patch disable the maintenance mode
7. Repeat the same on the host where the Database server installed

1 comment:

Anonymous said...

useful....thx